Occupational exposure to carcinogens in Brazil: An approach.

This study aims to estimate the prevalence of the primary occupational exposures, considered risk factors for Cancer in Brazil. We elaborated two exposure scenarios considering the agents' classification and the intensity of exposure, stratified by Brazilian regions and sex. Two pairs of specialists performed the classification of economic activities and occupations due to exposure. There was an excellent overall agreement (94%) and acceptable overall reliability (kappa 0.92, 95% CI 0.89-0.95). There is a notable difference (595%) in occupational exposure between the north (with a higher concentration of rural areas and extractivism) and southeast (with a higher level of industrial activities). There is a difference in prevalence from 833% for solvents to 1170% for inorganic dust between the two scenarios. There is a heterogeneity of exposures according to location, sex, circumstance, and sensitiveness of classification.

International cooperation group of emergency surgery during the COVID-19 pandemic.

PURPOSE: The COVID-19 pandemic has changed working conditions for emergency surgical teams around the world. International surgical societies have issued clinical recommendations to optimize surgical management. This international study aimed to assess the degree of emergency surgical teams' adoption of recommendations during the pandemic. METHODS: Emergency surgical team members from over 30 countries were invited to answer an anonymous, prospective, online survey to assess team organization, PPE-related aspects, OR preparations, anesthesiologic considerations, and surgical management for emergency surgery during the pandemic. RESULTS: One-hundred-and-thirty-four questionnaires were returned (N = 134) from 26 countries, of which 88% were surgeons, 7% surgical trainees, 4% anesthetists. 81% of the respondents got involved with COVID-19 crisis management. Social media were used by 91% of the respondents to access the recommendations, and 66% used videoconference tools for team communication. 51% had not received PPE training before the pandemic, 73% reported equipment shortage, and 55% informed about re-use of N95/FPP2/3 respirators. Dedicated COVID operating areas were cited by 77% of the respondents, 44% had performed emergency surgical procedures on COVID-19 patients, and over half (52%), favored performing laparoscopic over open surgical procedures. CONCLUSION: Surgical team members have responded with leadership to the COVID-19 pandemic, with crisis management principles. Social media and videoconference have been used by the vast majority to access guidelines or to communicate during social distancing. The level of adoption of current recommendations is high for organizational aspects and surgical management, but not so for PPE training and availability, and anesthesiologic considerations.

Occupational skin disease in mining: an Australian case series.

The mining industry has one of the highest rates of occupational disease across all industries. However, occupational skin disease (OSD) is not commonly reported in this industry, although has been estimated to affect up to 51 people per 100,000 workers, with contact dermatitis accounting for the majority of cases. It often has a poor prognosis and leads to days lost from work. There have been relatively few reports regarding the specific forms of OSD encountered by miners worldwide. We report our experience of miners attending our Occupational Dermatology Clinic and our investigations at two Australian mines. We compare our findings with other reports of OSD in the mining population. The most commonly observed skin condition was irritant contact dermatitis, but miliaria and allergic contact dermatitis were also observed. It is not surprising that most cases of OSD appear to be related to harsh working conditions and exposures to multiple skin irritants, however, specific exposures causing ACD should not be forgotten. Our findings are consistent with previous studies of OSD in miners.

Combined effects of occupational exposure to hazardous operations and lifestyle-related factors on cancer incidence.

We aimed to examine whether the number of types of hazardous operations at work experienced through a lifetime is associated with cancer incidence, and additionally examined the combined effects with lifestyle-related factors. Using a nationwide, multicenter, hospital inpatient dataset (2005-2015), we conducted a matched case-control study with 1 149 296 study subjects. We classified the participants into those with none, 1, or 2 or more types of hazardous operation experience, based on information of special medical examinations taken, mandatory in Japan for workers engaged in hazardous operations. Using those with no experience as the reference group, we estimated the odds ratios for cancer incidence (all sites, lung, stomach, colon and rectum, liver, pancreas, bile duct, and bladder) by conditional logistic regression with multiple imputations. We also examined the effects of the combination with hazardous operations and lifestyle-related factors. We observed increased risks for cancer of all sites, and lung, pancreas, and bladder cancer associated with the experience of hazardous operations. Multivariable-adjusted ORs (95% CIs) of cancer incidence of all sites were 1 (reference), 1.16 (1.12, 1.21), and 1.17 (1.08, 1.27) for none, 1, and 2 or more types of hazardous operation experience, respectively (P for trend <.001). Potential combined associations of hazardous operations with smoking were observed for lung, pancreas, and bladder cancer, and with diabetes for pancreas cancer. Engaging in hazardous operations at work and in combination with lifestyle-related factors may increase the risk of cancer. We highlight the potential for those engaged in hazardous work to avoid preventable cancers.

[Better screening for work-related cancers: The experience of Brest University Hospital Occupational Disease Center inpatient service]. / Améliorer le repérage des cancers professionnels : bilan de la consultation de pathologie professionnelle de liaison du centre hospitalier universitaire de Brest.

INTRODUCTION: An in-patient clinical service has been set up in March 2016 in the Occupational Diseases Center of Brest University Hospital, France, to seek for work-relatedness of diseases in patients hospitalized into the oncology and hematology departments. We present here data after two years of existence. METHODS: All cases of cancers or malignant hematological diseases (ICD-10 codes C00 to C97 and D37 to D48) seen between March 1, 2016, and March 1, 2018, have been identified. We present sociodemographic data, occupational exposures, occupation, business sector, and tobacco consumption. The causation level between the disease and each of the occupational exposures has been rated as strong, intermediate, weak or null by the occupational medicine specialist of the Occupational Diseases Center. RESULTS: Among the 196 patients encountered, there are 127 work-related diseases and 82 of these had one occupational exposure rated as strong or intermediate. The most frequent occupational hazards were asbestos (48 cases) and ionizing radiation (23 cases). The most frequent business sectors were metallurgy, mechanical engineering, and agriculture. Lung cancer was the most frequently reported disease (49 cases). DISCUSSION: . We identified well-known couples with occupational exposures and diseases, such as asbestos and lung cancer. We also identified a link between pesticides and leukemias. This in-patient clinical service is helpful to identify work-related exposures and in helping patients to get compensated.

Topographical classification of dose distributions: implications for control for worker exposure.

This paper deals with classification of dose distributions of nuclear workers based on antikurtosis (Q) and entropy coefficients (K) and their relationship presented in QK-diagrams. It is shown that determination of the most appropriate distribution to adopt, for a specific data set of a wide range of input data, requires building and analysing QK-diagrams for distributions of logarithms of individual doses. Actual dose distributions for emergency and occupational exposure situations were then considered, as well as doses for one day of work during clean-up and routine activities. It is shown that, in all cases, three types of distributions of logarithms of individual doses were present: normal, Weibull and Chapeau. The location of the representation point of a dose distribution reflects the degree of dose control of the group of workers whose individual doses are collectively displayed in the QK-diagram. The more the representation point of the analysed distribution of the logarithms of the individual dose of a given contingent of workers deviates from the point of the lognormal distribution, the more there was intervention in the process of individual dose accumulation. Thus, QK-diagrams could be used to develop a dose control function. It is shown that the hybrid lognormal distribution, which is widely used in the field of radiation safety, for the purpose of approximation of real dose distributions, is unable to satisfactorily describe many dose distributions arising in aftermath operations and occupational exposure.

Influence of errors in job codes on job exposure matrix-based exposure assessment in the register-based occupational cohort DOC*X.

Objective Job-exposure matrices (JEM) may be efficient for exposure assessment in occupational epidemiological studies, but they rely on valid job information. We evaluated the agreement between JEM-based exposure estimates according to self-reported job titles converted to DISCO-88 codes and according to register-based DISCO-88 codes in the Danish Occupational Cohort with eXposure data (DOC*X). Furthermore, we evaluated the agreement between these two sets of DISCO-88 codes. Methods We used JEM regarding wood dust, lifting, standing/walking, arm elevation >90°, and noise from DOC*X. Participants from previous questionnaire studies were assigned JEM-based exposure estimates using (i) self-reported job titles converted to DISCO-88 codes and (ii) DISCO-88 codes registered in DOC*X, in four time periods (1976-78: N=7707; 1981-83: N=2193; 1991-94: N=2664; 2004: N=11 782). Agreement between the exposure estimates and between the DISCO-88 codes (four-digit levels, 1-4) was evaluated by kappa (κ) statistics. Sensitivities were calculated using the self-reported observation as the gold standard. Results We found substantial agreement (κ>0.60) between exposure estimates for all types of job-exposures and all time periods except for one κ. Low sensitivity (30-65%) was found for the period 1981-83, but for the other time periods the sensitivities varied between 60-91%. For individual 4-digit DISCO-88 codes, the sensitivities varied substantially and overall the sensitivities increased by lower digit level of DISCO-88. Conclusion The validity of the DISCO-88 codes in DOC*X was generally high. Substantial agreement was found for the JEM-based exposure estimates and the DISCO-88 codes per se, although the DISCO-88 code-specific agreement varied across digit levels and time periods.

A national survey of occupational exposures in Tunisia.

INTRODUCTION: The evaluation of occupational exposures allows to guide preventive strategies and to suggest adequate solutions. AIM: Identify occupational exposures and constrains among workers of private sector in Tunisia. METHODS: A descriptive study including all companies of the private sector who are adhering to a service of occupational health of 17 Tunisian governorates. The survey was exhaustive for the services having less than 500 companies and by sampling for the services with more than 500.The data collection was based on data sheet completed by the occupational physician. RESULTS: This investigation concerned 1653 companies employing 161 517 employees. The industrial sector represented 52.8 %.Small and medium-sized enterprises represented 92.6 % of the studied companies. Companies having a committee of Health and Safety at work represented 16.82 % and 22.14 % had a safety officer. Posturales constraints are the most represented exposures (56%) followed by gestural constraints (27%). Heavy lifting concerned 17% of workers. Exposure to noise represented the third professional nuisance, 23% of employees are exposed. The employees exposed to organic solvents were among 16695 (10.34 %), distributed on 685 companies. CONCLUSION: This study allowed us to identify and to rank the professional exposures and constrains in the Tunisian private sector. This could lead to improving targeted strategies of prevention occupational risks.

Military Occupational Specialty Codes: Utility in Predicting Inhalation Exposures in Post-9/11 Deployers.

OBJECTIVE: The aim of this study was to examine military occupational specialty (MOS) codes to identify those at risk from inhalation exposures during Southwest Asia deployment. METHODS: Exposure intensity to diesel exhaust, sandstorms, burn pit smoke, combat dust, and occupational vapors/dusts/gases/fumes (VDGF) were scored for all Army/Marine MOS codes by an expert panel. Based on MOS code, panel-rated exposure scores were compared with questionnaire data from military personnel with postdeployment respiratory illnesses. RESULTS: All exposures except VDGF were rated higher (range P < 0.0001 to P = 0.003) for combat versus noncombat MOS codes. Deployers with respiratory illnesses reported more intense exposure to diesel exhaust (P < 0.0001), burn pit smoke (P < 0.0001), and sandstorms (P = 0.005) compared with panel raters. These deployers clustered in MOS codes rated highest for inhalation hazard exposure intensity. CONCLUSIONS: MOS codes are useful in identifying high-risk military occupations where medical surveillance and exposure control should be focused.

Occupational exposure to inorganic particles during pregnancy and birth outcomes: a nationwide cohort study in Sweden.

OBJECTIVES: The aim of this study was to investigate if occupational exposure to inorganic particles or welding fumes during pregnancy is associated with negative birth outcomes. DESIGN: A prospective national cohort study. SETTING: All single births from 1994 to 2012 in Sweden. Information on birth weight, preterm birth, small for gestational age, smoking habits, nationality, age, occupation, absence from work and education was obtained from nationwide registers. Exposure to inorganic particles (mg/m3) was assessed from a job exposure matrix. PARTICIPANTS: This study included all single births by occupationally active mothers (995 843). OUTCOME MEASURES: Associations between occupational exposures and negative birth outcomes in the form of low birth weight, preterm birth and small for gestational age. RESULTS: Mothers who had high exposure to inorganic particles and had less than 50 days (median) of absence from work during pregnancy showed an increased risk of preterm birth (OR 1.18; 95% CI 1.07 to 1.30), low birth weight (OR 1.32; 95% CI 1.18 to 1.48) as well as small for gestational age (OR 1.20; 95% CI 1.04 to 1.39). The increased risks were driven by exposure to iron particles. No increased risks were found in association with exposure to stone and concrete particles. High exposure to welding fumes was associated with an increased risk of low birth weight (OR 1.22; 95% CI 1.02 to 1.45) and preterm birth (OR 1.24; 95% CI 1.07 to 1.42). CONCLUSIONS: The results indicate that pregnant women should not be exposed to high levels of iron particles or welding fumes.

Efficiency of autocoding programs for converting job descriptors into standard occupational classification (SOC) codes.

BACKGROUND: Existing datasets often lack job exposure data. Standard Occupational Classification (SOC) codes can link work exposure data to health outcomes via a Job Exposure Matrix, but manually assigning SOC codes is laborious. We explored the utility of two SOC autocoding programs. METHODS: We entered industry and occupation descriptions from two existing cohorts into two publicly available SOC autocoding programs. SOC codes were also assigned manually by experienced coders. These SOC codes were then linked to exposures from the Occupational Information Network (O*NET). RESULTS: Agreement between the SOC codes produced by autocoding programs and those produced manually was modest at the 6-digit level, and strong at the 2-digit level. Importantly, O*NET exposure values based on SOC code assignment showed strong agreement between manual and autocoded methods. CONCLUSION: Both available autocoding programs can be useful tools for assigning SOC codes, allowing linkage of occupational exposures to data containing free-text occupation descriptors.

[Specificities of occupational asthma in women and its interactions with hormonal status]. / Spécificités de l'asthme professionnel chez les femmes et son interaction avec le statut hormonal.

BACKGROUND: Occupational asthma (OA) is described as the most common respiratory disease in industrialized countries. A female predominance characterizes many populations of asthmatic workers. Differences in occupational exposures by gender as well as hormonal variations could affect OA in women. PURPOSE: To identify the socio-occupational and medical characteristics of OA in women compared to men and to investigate a possible hormonal influence on OA in women. MATERIAL AND METHODS: This is a retrospective study, based on medical records of out patients of the Department of Occupational Medicine during the period between 1st January 2009 and 30 June 2016 for OA completed by a phone call to collect missing data. RESULTS: Over 222 cases of OA, a female predominance was noted (60.81%), which was predominantly in the textile sector (61.5%). Clinically, men had more exercise dyspnea and wheezing, whereas the association with rhinitis was significantly greater in women. The majority of women with asthma had irregular menstrual cycles (46.2%), they were multiparous in 54%, menopaused in 13% of cases with a mean age of menarche of 12±1.65 years. A worsening of OA was noted in 58% of women during their perimenstrual period, 75% during pregnancy and 14% of women when taking hormonal contraceptives. In asthmatic women, only the presence of non-specific bronchial hyperreactivity was significantly associated with menarche age (P=0.007). CONCLUSION: Differences between men and women in OA with variability of symptoms during female genital life have been identified. Further studies to personalized care strategies for women need to be undertaken.

Does residential mobility during pregnancy induce exposure misclassification for air pollution?

BACKGROUND: Prenatal exposure to outdoor air pollution has been shown to have health effects in many studies; low birth weight, preterm delivery, small for gestational age, and stillbirth are the most often cited. However, exposure of pregnant women is difficult to quantify, especially with regard to their mobility, which is rarely taken into account in epidemiological studies. This study aimed to assess the impact of mobility of pregnant women living in Paris, France, on their exposure estimates to nitrogen dioxide (NO2). METHODS: A total of 486 pregnant women were recruited in 5 maternity hospitals in Paris between January and April 2016. A questionnaire was used to collect mothers' characteristics (demography, education, etc.) and to assess their daily mobility during pregnancy (time spent at work, commuting time and mode used to move from residential to occupational places). Daily NO2 concentrations were estimated based on the combination of annual average concentrations modeled at the census block scale and daily concentrations measured from fixed monitoring stations. Different models were used to compare the exposure of pregnant women in residential and occupational places, also taking into account travel time and travel mode. The socioeconomic profile of the census blocks was characterized using a multi-component index. RESULTS: During the first trimester of pregnancy, women living in the least deprived census blocks were exposed to higher concentrations of NO2 than those living in the most deprived ones. Occupational mobility had a small impact on exposure levels (average increase after taking account of mobility: + 0.52 µg/m3) which was not related to the socioeconomic profile of the women. The commuting mode made a greater difference (+ 1.46 µg/m3 on average), in particular among women living in the most deprived census blocks. CONCLUSIONS: Our study illustrates that air pollution exposure can be underestimated when ignoring occupational mobility and commuting mode of pregnant women. This effect might be differential according to the neighborhood deprivation profile.

Genetic variation in KCNQ4 gene is associated with susceptibility to noise-induced hearing loss in a Chinese population.

Noise-induced hearing loss (NIHL), one of the most widespread occupational health risks worldwide, is a kind of complex disorder resulting from both genetic and environmental factors. KCNQ4 channels are crucial to the internal ear potassium recycling. To explore whether KCNQ4 polymorphism is associated with individual susceptibility to NIHL, we performed this genetic association study on 571 NIHL cases and 639 normal hearing controls selected from about 2700 Chinese noise-exposed workers. General information and audiometric data were obtained through questionnaires and pure-tone audiometry (PTA). DNA samples were collected and genotyping for three selected SNPs (rs709688, rs2769256 and rs4660468) was performed. Significant differences were observed between cases and controls for the genotype frequency and allele frequency in rs4660468, suggesting that rs4660468 CT/TT genotype and T allele may be risk factors for NIHL. In subjects exposed to noise for more than 16 years (OR = 1.23, 95% CI = 1.09-1.53) and those who exposed to noise >92 dB (OR = 1.29, 95% CI = 1.08-1.69), increased risks of NIHL were found after stratified analysis for rs4660468. Our results suggest that rs4660468 T allele of KCNQ4 involves with a higher risk of NIHL and could be one biomarker of susceptibility for Chinese noise exposed workers.

Grouping schemes of welding fume exposure in shipyard welders.

Welding fume exposure can increase the risk of chronic obstructive pulmonary disease (COPD). The aim of this study was to evaluate the optimal grouping schemes of welding fume exposure in shipyard welders for future accurate examination of the association between welding fume exposure and COPD. Industrial hygiene records, including welding fume measurements between 2002 and 2009 were collected from a shipyard. A total of 2,360 personal welding fume measurements was compiled with a geometric mean of 1.66 mg/m3 and a geometric standard deviation of 4.02. Welding jobs were categorized into 8 groups. There were 9 working areas. To obtain the optimal grouping scheme, various grouping schemes were created using job, area, and job*area combination. To compare various grouping schemes, contrast and precision were calculated for each grouping scheme. For all measurement data, group mean ranking method created by ranking geometric means of the job*area combination into 3 groups (group mean ranking method) showed the best contrast and precision values among various grouping schemes, followed by grouping based on the job. For a subset of the data excluding job*area combinations with less than 10 measurements, grouping based on the job showed greater contrast than group mean ranking method, while for other subsets, including only repeated measurement data or further excluding job*area combinations with less than 10 measurements from the repeated measurement subset, group mean ranking method showed greater contrast than grouping based on the job. Our results showed that group mean ranking or grouping based on the job could be a candidate for the optimal grouping schemes in this shipyard. Our efforts for optimal grouping scheme may aid future cohort study to elucidate the association between welding fume exposure and COPD.

Study of the validity of a job-exposure matrix for the job strain model factors: an update and a study of changes over time.

OBJECTIVES: The objectives of the study were to construct a job-exposure matrix (JEM) for psychosocial work factors of the job strain model, to evaluate its validity, and to compare the results over time. METHODS: The study was based on national representative data of the French working population with samples of 46,962 employees (2010 SUMER survey) and 24,486 employees (2003 SUMER survey). Psychosocial work factors included the job strain model factors (Job Content Questionnaire): psychological demands, decision latitude, social support, job strain and iso-strain. Job title was defined by three variables: occupation and economic activity coded using standard classifications, and company size. A JEM was constructed using a segmentation method (Classification and Regression Tree-CART) and cross-validation. RESULTS: The best quality JEM was found using occupation and company size for social support. For decision latitude and psychological demands, there was not much difference using occupation and company size with or without economic activity. The validity of the JEM estimates was higher for decision latitude, job strain and iso-strain, and lower for social support and psychological demands. Differential changes over time were observed for psychosocial work factors according to occupation, economic activity and company size. CONCLUSIONS: This study demonstrated that company size in addition to occupation may improve the validity of JEMs for psychosocial work factors. These matrices may be time-dependent and may need to be updated over time. More research is needed to assess the validity of JEMs given that these matrices may be able to provide exposure assessments to study a range of health outcomes.

Exposure to respirable silica among clay brick workers in Kathmandu valley, Nepal.

Previous studies report high respirable silica exposures among clay brick workers globally; however, there are little data on exposures among workers in fixed chimney Bull's trench kilns, the predominant kiln type in Kathmandu valley, Nepal. We investigated respirable silica exposures among workers (N = 46) in five similar exposure groups (SEGs). Mean exposures were highest for red brick loading/carrying (331 µg/m3), followed by green brick stacking (223 µg/m3), fireman (102 µg/m3), coal crushing/carrying (92 µg/m3), and green brick molding (71 µg/m3). The average free silica content (13.8%) in the respirable dust fraction was similar to levels reported for clay brick workers employed in other types of kilns. Dust control measures and respiratory protection are recommended, with priority given to workers assigned to red brick loading and stacking and green brick stacking and carrying.

Characteristics of acute occupational pesticide exposures reported to poison control centers in Texas, 2000-2015.

In the United States, there is limited literature on occupational pesticide exposures despite being associated with adverse health outcomes, including in large states such as Texas. The purpose of this article is to characterize occupational pesticide poison center exposures in Texas. Descriptive statistics were used to describe exposures (eg, exposure routes, type of pesticide, medical outcome, clinical effects, and temporal/seasonal patterns). From 2000 to 2015, there were 2,303 occupational pesticide poison center exposures. Common types of reported pesticides were insecticides (67.3%), herbicides (17.7%), and repellents (5.8%). The highest proportion of exposures were among those aged 20 to 29 years (24.9%). The top clinical effect categories were gastrointestinal (25.8%), neurological (19.2%), and dermal (14.9%). Characterizing occupational pesticide poison center exposures can support improved surveillance systems and guide future research or interventions.

Risk assessments using the Strain Index and the TLV for HAL, Part I: Task and multi-task job exposure classifications.

BACKGROUND: The Strain Index (SI) and the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value for Hand Activity Level (TLV for HAL) use different constituent variables to quantify task physical exposures. Similarly, time-weighted-average (TWA), Peak, and Typical exposure techniques to quantify physical exposure from multi-task jobs make different assumptions about each task's contribution to the whole job exposure. Thus, task and job physical exposure classifications differ depending upon which model and technique are used for quantification. This study examines exposure classification agreement, disagreement, correlation, and magnitude of classification differences between these models and techniques. METHODS: Data from 710 multi-task job workers performing 3,647 tasks were analyzed using the SI and TLV for HAL models, as well as with the TWA, Typical and Peak job exposure techniques. Physical exposures were classified as low, medium, and high using each model's recommended, or a priori limits. Exposure classification agreement and disagreement between models (SI, TLV for HAL) and between job exposure techniques (TWA, Typical, Peak) were described and analyzed. RESULTS: Regardless of technique, the SI classified more tasks as high exposure than the TLV for HAL, and the TLV for HAL classified more tasks as low exposure. The models agreed on 48.5% of task classifications (kappa = 0.28) with 15.5% of disagreement between low and high exposure categories. Between-technique (i.e., TWA, Typical, Peak) agreement ranged from 61-93% (kappa: 0.16-0.92) depending on whether the SI or TLV for HAL was used. CONCLUSIONS: There was disagreement between the SI and TLV for HAL and between the TWA, Typical and Peak techniques. Disagreement creates uncertainty for job design, job analysis, risk assessments, and developing interventions. Task exposure classifications from the SI and TLV for HAL might complement each other. However, TWA, Typical, and Peak job exposure techniques all have limitations. Part II of this article examines whether the observed differences between these models and techniques produce different exposure-response relationships for predicting prevalence of carpal tunnel syndrome.